01484 405 666


EVAPORATORS

A full range of air-conditioning evaporators suitable for easy mix matching with remote packs or other condensing unit systems. These include cassettes, concealed ducted and wall mounted cased/chassis unit options.


CC 600 & CC 875


Designed for rapid installation and easy maintenance, both the CC 600 and CC 875 are ideal in process or material cooling applications at low temperatures.

Units are available with a range of cooling duties from 2 to 11kW and a range of heating duties. The lightweight, one-piece, removable chassis allows total access to all mechanical and electrical connections. The units deliver long air throws, low sound levels and come with 3 control options; Electromechanical, Infrared ‘L’ and Electronic ‘E’.


  • Low sound levels
  • Long air throws
  • 3 or 4 way air discharge
  • De-Ice thermostat
  • Removable, lightweight, one piece chassis
  • Integral, easy to clean, drain tray
  • Easy filter access and long life washable filters
  • Modern, slim, square fascia with rounded corners
  • All services accessed from one corner
  • Coil cleaning from all sides
  • Fan guard for safety
  • Fresh air inlet provision and branch duct provision
  • Motor speed range selection to suit application
  • Lift pump or condensate pump
  • Electric heating (2kW) option
  • Suitable for use with a R407C, R404A, R410A and R134A for cooling only applications
  • Suitable for heat pump applications with R407C
  • Can be matched with Marstair R407C MCU+ cooling only condensers and MHPUL(E) heat pumps
  • Cooling down to 10°C at -2.5°C evaporating temperature (Electromechanical Control only)
  • The CC ‘E’ can be networked as either a multi-split or group control system

wall mount evaporator direct expansion

The wall mounted WM series is ideal for process and material cooling applications at low temperatures. The units are versatile and simple to install and maintain.

Designed for high wall mounting, the hi-level front air flow optimises the Coanda effect, pushing air forward from the top of the unit for effective air distribution, minimising draughts. Designed and manufactured in the UK using high quality components, the wall mounted WM range is available in 3 models with cooling duties from 6 to 10kW (heating duties from 5 to 9kW). The units deliver long air throws, low sound levels and come with 3 control options; Electromechanical, Infrared ‘L’ and Electronic ‘E’.






WALL MOUNT


  • Low sound levels
  • Space saving ‘V’ shaped heat exchanger
  • Adjustable air deflectors
  • Long life washable filters
  • De-Ice thermostat with the ‘L’ version (optional with wired control)
  • Wipe clean, lightweight, one-piece removable cover
  • Optional background electric heating or boost heating
  • Optional remote temperature sensor (wired control only)
  • The WM ‘E’ can be networked as either a multi-split or group control system
  • Suitable for use with a R407C, R404A, R410A and R134A for cooling only applications
  • Suitable for heat pump applications with R407C
  • Can be matched with Marstair R407C MCU+ cooling only condensers and MHPUL(E) heat pumps
  • Cooling down to 10°C at -2.5°C evaporating temperature (Electromechanical Control only)

DXD

The DXD(H) series is a concealed, ducted evaporator designed for horizontal ceiling void applications and supplied complete with a discharge plenum and spigots. Ideal for process and material cooling applications at low temperatures and irregular shaped rooms where low sound levels are essential.

Designed and manufactured in the UK using high quality components, the DXD(H) is available with cooling duties from 3.5 to 10.4kW. The DXD(H) exhibits all of the features expected from a modern, high quality evaporator whilst remaining highly competitive and exceptionally flexible.

  • Low sound levels
  • De-Ice thermostat
  • Easy filter access
  • Electronic remote controller (Hard Wired)
  • 250mm Spigots
  • Cooling down to 10°C at -2.5°C evaporating temperature







ducted evaporator direct expansion

OPTIONS

  • Condensate Pump
  • Electric Heating
  • LPHW
  • Return Air Plenum
  • 200mm Spigots
  • Fresh Air Inlet
  • Return Air Sensor
  • Programmable Timer (For wired control)

HLR

High Capacity Evaporator

The HLR high capacity evaporator is designed to give many years of robust service in industrial surroundings for process and material cooling applications at low temperatures. Designed and manufactured in the UK with a wired remote control for hard wiring.


high capacity evaporator
  • High or low level wall mounting with front or top air discharge or ceiling mounting
  • Fresh air inlet facility
  • Wired remote control (for hard wiring)
  • Suitable for use with a R407C, R404A, R410A and R134A for cooling only applications
  • Suitable for heat pump applications with R407C
  • Can be matched with Marstair R407C MCU+ cooling only condensers and MHPUL(E) heat pumps
  • Cooling down to 10°C at -2.5°C evaporating temperature


  • OPTIONS

    • Ceiling or floor mounting kits
    • De-Ice thermostat
    • Air deflectors
    • LPHW coil
    • Return air sensor including electronic thermostat
    • Condensate pump (5m head with overflow protection)





DXT

R407C, R410A, R404A, R134A Cooling only

The Marstair DXT series units comprise of vertical wall mounted and horizontal ceiling or void mounted DX fan coil units providing reliable internal climate control when cooling or heating is required. Capacities range from 0.5kW to 10kW.

This new product is available as a standard chassis unit for void mounting or with a stylish cabinet for surface mounting on walls or ceilings. Chassis units may be free blow or ducted.

  • Quiet in use - room occupants will appreciate the very low sound levels
  • Class ‘O’ fire rated thermal and acoustic insulation
  • Compact, low energy motors fitted to forward curved centrifugal fans
  • All models are available with various air inlet and discharge combinations
  • Units are available with AC or EC/DC fan motors. AC fans are fitted with a multi-tap transformer providing up to six fan speeds, whilst EC/DC fans may be used for variable speed control via a potentiometer or a 0-10V output from a digital controller
  • Units are easily and safely installed using the keyhole slots in the back panel to mount them on a wall or ceiling, or to hang from drop rods
  • Various control options are available, ranging from simple hard wired wall mounted controllers to full BMS compatibility to meet individual project requirements
  • Servicing is made easy with simple access to the standard EU2 filter, the fan assemblies and any unit mounted controls.
  • Chassis and cased versions providing ducted or free blow options.

CO2 EVAPORATORS


A wide range of CO2 evaporators specifically designed for comfort cooling and low temperature air conditioning applications such as food preparation areas.


These simple to install and quiet evaporators offer the ability to deliver cooling at the higher CO2 pressures required for typical comfort cooling evaporating temperatures. There are also two options for heating including a LPHW (Low pressure hot water) coil or hot gas heating circuit for recycling the waste heat produced from the CO2 pack.

This allows all your refrigeration and air conditioning needs to be supplied through the one CO2 pack, creating a more efficient system and eradicating the need for separate split systems for space cooling and heating.

  • Cooling duties from 2.9 to 8.2kW
  • CO2 cooling maximum operating pressure up to 60barg
  • CO2 cooling coils tested to 90barg
  • CO2 heating maximum operating pressure up to 120barg
  • CO2 heating coils tested to 140barg
  • Low sound levels
  • Long air throws
  • Easy access filters
  • Electric heating up to 4kW
  • AC and EC fan options available